Straight Carbide Insert Surfacing Heads

Straight Carbide Insert Surfacing Heads

Knife These heads are great! It is just so handy to have a set of fresh carbide straight knives whenever you need them. They can be used from everything from "S4S"ing Teak to putting a backout on an MDF casing. They cut smooth with virtually no tear-out. They use standard ICK 2 sided inserts and it is very quick and inexpensive to replace the carbide inserts.

Rebate heads are great for cutting rabbits and dados.

Stackable heads can be assembled at interlocking angles to form longer continuous cuts.

Jointer heads are great multi-purpose surfacing heads.

Carbide Insert Rebate Heads with Side Spurs

Cutting Length	Wings	Bore	Dimaeter	Price	Availabilty
2" ( 50mm )	2	1.25"	85mm	155.00	Stock
2" ( 50mm )	2	1.25"	100mm	169.00	Stock
2" ( 50mm )	2	1.25"	125mm	189.00	Stock
2" ( 50mm )	2	1.5"	125mm	259.00	1 week
2" ( 50mm )	2	40mm	125mm	259.00	1 week
2" ( 50mm )	2	1 13/16"	125mm	259.00	1 week

Stackable Carbide Insert Cutter Heads

Cutting Length	Wings	Bore	Dimaeter	Price	Availabilty
1 3/16" ( 30mm )	4	40mm	125mm	259.00	Stock
2" ( 50mm )	4	40mm	125mm	289.00	Stock
2" ( 50mm )	4	1.5"	125mm	289.00	Stock
2" ( 50mm )	4	1 13/16"	125mm	289.00	Stock

Carbide Insert Jointer Cutter Heads

Cutting Length	Wings	Bore	Dimaeter	Price	Availabilty
2" ( 50mm )	4	1.25"	125mm	336.00	3 weeks
2" ( 50mm )	4	40mm	125mm	360.00	3 weeks
2" ( 50mm )	4	1.5"	125mm	360.00	3 weeks
2" ( 50mm )	4	1 13/16"	125mm	360.00	3 weeks

3.15" ( 80mm )	4	1.25"	125mm	496.00	3 weeks
3.15" ( 80mm )	4	40mm	125mm	525.00	3 weeks
3.15" ( 80mm )	4	1.5"	125mm	525.00	3 weeks
3.15" ( 80mm )	4	1 13/16"	125mm	525.00	3 weeks